GPPS 1540 Plastic Pellets (Melt Flow Rate 12)-General Purpose Polystyrene Resin-Raw Material Supplier
Polystyrene (PS) granules: is composed of styrenemonomer (SM) polymerization, can be synthesized by a variety of synthetic methods, the current industry mainly by bulk polymerization and suspension polymerization.
Polystyrene(PS) is a thermoplastic non-crystalline resin, mainly divided into General Purpose polystyrene (GPPS), High Impact polystyrene (HIPS) and Expandable Polystyrene (EPS) .
1. Polystyrene foam (Expanded Polystyrene referred to as EPS) is a light-weight polymer. It is the use of polystyrene resin into the blowing agent, while heating to soften, produce gas,forming a hard closed-cell structure foam Plastic.
2.Impact resistant polystyrene (HIPS) is an impact resistant polystyrene product produced by adding polybutyl rubber particles to polystyrene.
Application
1. High Impact Polystyrene(HIPS)
HIPS can be used to produce the shells of electrical household appliances, toys, automobile parts, daily necessities, etc. HIPS has excellent impact resistance, rigidity,electrical insulating property, corrosion resistance and dyeability.
2. General purpose polystyrene (GPPS)
GPPS, can be used for daily necessities, electrical appliances, instrument housings, toys, lamps, household appliances, stationery, cosmetics containers, indoor and outdoor decorations, fruit plate, optical parts (such as prism, lens) lens and molding, Lamps, telecommunications accessories, electric frequency capacitors film, high-frequency insulation materials, television sets and other containers, waveguide, chemical containers.ade is mainly used for making rotomolded products, large-sized outdoor toys, storage tanks, roadblocks, etc.
3. Expandable polystyrene (EPS)
EPS has also been used for a large number of decorative materials, film and television scene layout, character modeling, marine life jackets and buoys. In particular, large foam sheet market demand is very large, as color steel sandwich panel, steel (board) grid composite light panels, wall outside the paste board, roof insulation boards and geothermal panels, it is more widely Used in the field of housing construction, for insulation, heat insulation, waterproof and moisture-proof materials on the ground.
Physical properties of | Value/unit | Test standard |
The density of | 1.04 g/cm3 | ISO 1183 |
The density of | 1.04 g/cm3 | ASTM D792 |
Melt mass flow rate (MFR) | ||
200 oC/5 Kg | 46 g/10 min | ASTM D 1238 |
200 oC/5 Kg | 46 g/10 min | ISO 1133 |
Mechanical properties of | Value/unit | Test standard |
The tensile strength | ||
The yield (yld) | 4.9 Mpa | ASTM D638 |
The yield (yld) | 4.9 Mpa | ISO 527-2 |
Tensile elongation | ||
The yield (yld) | 3% | ASTM D638 |
The yield (yld) | 3% | ISO 527-2 |
Reposted for informational purposes only. Views are not ours. Stay tuned for more.

