SMS/SMMS Nonwoven Fabric-Spunbond-Meltblown Composite Material for Medical/Hygiene Use-Raw Material Supplier

Yiwu Really Textiles Co., Ltd ls Professional Manufacturer Of SSS Spunbond Non Woven Fabric  &  SMS/SMMS/ SSMMS nonwoven For Diapers Raw Materials. We have strong power to support our production, from factory environmentconstruction to equipment confiquration, all leading to high quality products.

• Hydrophobic SSS nonwoven for Baby Diaper
• Hydrophilic SSS Nonwoven for Baby Diaper
• Super Soft & Hydrophilic SSS Nonwoven for women’s napkin / pet mat
• Hydrophobic SMS/SMMS/SSMMS Nonwoven for protective gown
• Anti-static SMS/SMMS/SSMMS Nonwoven for factory suit

SMMS fabric internal structure

1. The inner two layers are melt-blown polypropylene fiber, which is composed of short, fine fibers and can provide effective protection against particle penetration and liquid penetration.

2. The outer two layers are spunbond non-woven fabrics with continuously wound fibers, which can make the fabric have good tension. 3. SMMS composite non-woven fabric is composed of two layers of spunbond fabric and two layers of melt-blown non-woven fabric. Using the better strength of spunbond fabric and the higher filtration efficiency of melt-blown non-woven fabric to combine the advantages of both, the SMMS composite non-woven fabric has better toughness: higher filtration performance and soft feel, and can Block and isolate the invasion of dust, particles, alcohol, plasma, liquid and bacteria and viruses.

We produce spunbond (SS), SMS and SMMS fabrics, especially for the hygiene and medical sectors. Our SMS /SMMS nonwovens are produced for the hygiene industry, are ultra-soft and hydrophilic, and can be used in baby and adult diapers.

Topsheets, backsheets, leg cuffs nonwovens have high hydrostatic pressure resistance. SMS/SMMS/SSMMS fabrics are also used for core wraps, dusting layers, front and back flaps.

We also produce spunbond (SS), SMS and SMMS nonwovens for the medical industry, from disposable surgical sets to other hospital textiles. Our laboratories also perform tests for penetration time, rewet, liquid penetration resistance (water column) and other physical properties.

Raw material type:
100% Polypropylene (PP) Spunbond (SS) Weight range: 12 g/m2 – 90g/m2
SMS/SMMS Weight range: 10 g/m2 – 70 g/m2
Production width: 160cm(63inch) – 320cm(126inch)

Features: Hydrophilic, anti-static, anti-UV, flame retardant, etc.

Partnership

A strong partnership between  diaper manufacturers and rawmaterial suppliers can result in mutual success, with both partiesbenefiting from shared business goals and values.

We have strategic cooperation with many famous brand diaper manufacturers in Hangzhou, as well as raw material manufacturers such as Sinopec, PetroChina, Shanghai Secco, and Zhejiang Petrochemical.

Quality Control

Our factory implements quality control measures and is fully equipped with various non-woven testing instruments and equipment to ensure that materials meet specific standards or requirements.

Quality Assurance

Our factory has dedicated testing inspectors and laboratory to provide quality assurance services to ensure materials meet specific standards or requirements.

Raw material Quality testing

We conduct tests on raw materials  ( pp granule, paper core, and so on) to ensure theymeet specific standards or requirements

3.2M SMMS Medical Nonwoven Line

SMMS (spunbond-meltblown-meltblown-spunbond) is a composite material made of four composite materials. This material provides the advantages of light weight, lateral strength and long-lasting strength. SMMS is commonly used for industrial and medical purposes as well as textile and consumer products to make work clothes, isolation gowns, surgical masks and more.

Medical professionals mostly use disposable SMMS non-woven products.
Since it is a single-use product, it can be incinerated after each use, thus reducing the spread of pollutants.