HIFLUX - High Pressure Safety Head & Rupture Disc

* [HIFLUX] Safety Head & Rupture Disc

Safety head is assembly housing for pressure burst disc. It is used to prevent damage and explosion and to protect the equipment with releasing the pressure quickly, in case of over pressure. It requires the burst disc which is called Rupture Discthat burst on overpressure condition.

* Features

- To protect the equipment damage.
- No leaking before the rupture disc burst case.
- Stainless steel 316 material. (Except 1,000psig : Nickel)
- 3/8" NPT Outlet design to connect vent lines.
- Include fitting accessories for suitablepressure and sizes for tubing.
- manufactured with a tolerance of plus 6% and minus 3% of specified burst pressure.
- Rupture disc is not included in this item required to choose proper rupture disc separately. (Rupture Disc Spec.)
* Pressure Release Time
1. In case of pressure is increase rapidly.
2. Not allow for any leaking.
3. When system requires to release in short time.
* Consideration of selection
1. Set pressure, Temp and medium.
2. Operation condition (Static / Back Pressure, pulsating, Etc,.).
3. Recommend regularly under the corrosion, metal fatigue, repeating environment.
* [HIFLUX] High pressure safety head series

15,000psi	20,000psi	60,000psi

* [HIFLUX] Rupture disc spec.

Standard Burst Pressure (in psi at 72 °F)
1,000	3,000	5,000	7,000	9,000	11,000
1,500	3,500	5,500	7,500	9,500	11,500
2,000	4,000	6,000	8,000	10,000
2,500	4,500	6,500	8,500	10,500

 

Standard Burst Pressure (in psi at 72 °F)
12,500	15,000	17,500	18,000	20,000

 

Standard Burst Pressure (in psi at 72 °F)
22,500	30,000	40,000	55,000
25,000	35,000	45,000	60,000
27,000	37,500	50,000	65,000

 

* Other product

	High pressure needle valve		High pressure pipe needle valve
	High pressure check valve		High pressure ball valve
	High temperature valve		High pressure control valve
	Air operated valve		High pressure tube fitting
	High pressure tube		High pressure nipple
	Low pressure tube		High pressure gauge
	High pressure regulator		Back pressure regulator
	High pressure union adapter		General pressure regulator
	High pressure adapter		High pressure male adapter
	Tube support
	Safety Head		Rupture disc
	Tooling Set-Coning tool		Tooling Set-Reseating tool
	Tooling Set-Threading tool		Lok Type Fitting
	Lok Type Valve

* Ordering option

- As our products are divided into pressures of 5,500~150,000psi, body type and port size, you can use them according to the specifications which you want to use.
- Our products generally are produced with STS materials, but they can be manufactured with other materials on demand so that various fluids and gases can be used.
- Please inquire with us about special materials apart from the above-mentioned materials, such as STS316, HC-276, INC600, INC700, Ti and Ni.